Platinum Tools TXG200 NetXpert XG2 10G Network Tester Basic Kit

  • Ethernet Speed Certification of Copper and Fiber Optic Systems up to 10GB
  • Complete Active Network Testing Over Copper, Fiber and WiFi Systems
  • Cable Qualification to IEEE Standards
  • TDR & Fiber Cable Length Measurement
  • PoE testing up to 90W (PoE++)
  • Made in USA
Out of Stock. Call for Availability - Pre-order now!
Select Store to check availability.
Have questions? 800-531-5369


The NetXpert XG2 can certify copper or fiber networks to 10G speeds using advanced Bit Error Rate Testing (BERT), pushing real data packets over the cable and measuring the results. This is real world testing, which proves the capabilities of new networks and helps to identify those older cable runs that can operate at higher speeds. The XG2 is also equipped with a full suite of active network tests and tools to speed network installs, including PoE testing and network testing over WiFi. The NetXpert XG2 is designed to be the one device that can perform all the tests you need during an install, simplifying and speeding up the process.

One Device to Handle All Your Testing Needs
  • Full color 7" touchscreen in durable armored housing
  • Convenient form factor with safety hand straps and built-in kickstand
  • Powered by rechargeable lithium/ion battery pack with optional high-energy upgrade (p/n TXGBATX) or test on AC while charging
  • Field-replaceable RJ45 port, dual SFP+ ports, USB port
  • Easy software updates over wifi or cable for future feature expansion
  • Generate, document, log and export test reports in PDF, CSV, and XML formats
Copper Cable Testing
  • Ethernet speed certification to 1/2.5/5/10G
  • Cable qualification to 1/2.5/5/10G
  • Pass/fail cable test results
  • TDR Cable length measurement
  • Distance to opens and shorts
  • TIA568A/B wiremap testing
  • Tone generator
  • Custom cable labeling
Active Network Testing
  • Works with copper, fiber, or WiFi
  • Ping to a specific IP or URL address
  • Link light to identify location on a switch
  • Verifies DHCP connectivity and DNS
  • Discovers CDP and LLDP Protocols
  • Network Mapping & Traceroute
  • VLAN Discovery
Fiber Optic Cable Testing
  • Ethernet speed certification to 1/2.5/5/10G
  • Cable qualification to 1/2.5/5/10G
  • Pass/fail fiber cable test results
  • Fiber cable length measurement
  • Fiber loss measurement
  • Livelight active transmission testing
  • Optional microscope image testing
WiFi Testing
  • Signal strength
  • Internal, or external WiFi via a dongle
PoE Testing
  • Load, current and voltage
  • PSE & PD class detection
  • PoE cable pairs

  • Length Measurement: Time Domain Reflectomoetry
  • Output Connections: 8- Position Shielded Modular Jack (Data)  |  2 x 10Gb SFP+ (Fiber)
  • Interfaces: USB Type A
  • Languages: EN, FR, ESP, DEU, ITA
  • Temperature: Operating: -10 to 60°C  |  Storage: -20 to 50°C  |  When Charging: 10 to 40°C
  • Humidity: 10 to 90% non-condensing
  • Altitude: Operating: 10,000 Ft. (3,048m)
  • Power Supply: Input 100-240VAC, Output 12VDC 2.5A
  • Battery: Li-Ion, 7.8V 5500mAh - expected initial life 4hrs. typical at 1Gb speed
  • Enclosure: Rubber armored impact-resistant plastic
  • Size: Tester: 9.75 x 7 x 3" (245 x 177 x 73mm)  |  Remote: 5.25 x 7 x 2.25" (130 x 177 x 55mm)
  • Weight: Tester: 2.65lbs. (1.2Kg)  |  Remote: 1.3lbs. (0.6Kg)
  • Warranty: One Year
  • Compliance: CE
TXG200 Basic Kit Includes
  • XG2 Tester
  • Active Remote
  • 2 Chargers
  • 2 Patch Cables
  • Hard Shell Carrying Case (17.75" x 13.00" x 5.00" | 8.5lbs)

Ratings & Reviews