NTE Electronics Samlex Builder Series 800W Power Inverter

  • Lightweight, Compact, Highly Portable
  • 2.1A USB Port (compatible With All New Release Smartphones)
  • Cool Surface Technology
  • Low Battery Input Alarm
  • Safety Certified To UL Standards
  • Easy To Install And Operate
  • Load Controlled Cooling Fan
  • Soft Start Technology
  • Universal Protection Circuit - Thermal, Battery, Overload, Short Circuit & Earth Fault
  • 2 Year Manufacturer Warranty
Select Store to check availability.
Have questions? 800-531-5369


The 79SLX800BUI is a Samlex Builder Series 800W Power Inverter from NTE Electronics. Connect the inverter through your vehicle and plug in everthing from smartphones and laptops to skill saws and power washers. Excellent for working in remote locations, this 800W inverter is perfect for powering a job-site work bench. Easily keep your battery operated power tools charged and ready with the Samlex Builder Series Power Inverter.


Lightweight, compact, highly portable
2.1A USB port (compatible with all new release smartphones)
Cool surface technology
Low battery input alarm
Safety certified to UL standards
Easy to install and operate
Load controlled cooling fan
Soft start technology
Universal protection circuit - thermal, battery, overload, short circuit & earth fault
2 year manufacturer warranty

Battery System Voltage12 VDC
Nominal Input Voltage12.5 VDC
Input Voltage Range> 10.8 VDC to < 15.4 VDC
Input Current at Continuous Power72A to 75A
Input Current at No Load0.25A to 0.35A

Output Voltage Wave FormModified Sine Wave
Output Voltage (Frequency)115VAC + 10% / -2%; 60 Hz ± 5%
Output Power, Continuous (Resistive Load)800W
Output Power, Surge (<1 Sec., Resistive Load)1600W
Peak Efficiency (at 50% CF Continuous Power)90%
USB Charging PortUSB 3.0, Connector Type A; 5 VDC, 2.1A

Low Input Voltage Alarm10.8 VDC ± 0.3 VDC
Low Input Voltage Shutdown10.5 VDC ± 0.3 VDC
High Input Voltage Shutdown15.4 VDC ± 0.2 VDC
Overload & Ground Fault ShutdownYes. Latches in shutdown condition. Manual reset: Switch OFF the ON/OFF switch, wait 3 minutes and switch ON again.
Over Temperature ShutdownYes. Auto reset on cooling down.
Cooling FanLoad controlled: Switches ON at 35W to 45W.
Input Fuse: 32V, Automotive Type ATC105A (3 x 35A in parallel) (not user accessible)

DC InputsM4 Thumb Screw
AC Output2 x NEMA 5-15R Outlets

General Specifications:
Neutral to Chassis BondingNo. Neutral of the NEMA 5-15R AC Outlet is isolated from the chassis.
Operating Temperature Range0° to 25°

Ratings & Reviews