MG Chemicals Silicone Heat Transfer Compound (5 oz)

SKU# 860-150G
MFR# 860-150G
  • Very high maximum operating temperature (-68°C - +200°C)
  • Good thermal conductivity
  • High dielectric strength
  • Non-bleeding
  • Non-conductive
  • Long service life
  • Provides excellent corrosion resistance
  • Contact conductivity improvement
Select Store to check availability.
Have questions? 800-531-5369


The 860-150G is M.G. Chemicals Silicone Heat Transfer Compound. This 5 oz tube of compound is designed for use in transferring heat away from electrical and electronic devices such as transistors, power diodes, semi-conductors, ballast's and thermocouple wells.


High thermal conductivity
High dissipation factor
Will not dry or harden
High dielectric constant
Use with heat sinks or metal chassis
Contains zincs oxides and polydimenthyl siloxane
Physical Specifications:
AppearanceWhite paste
Specific Gravity @ 25°C (77°F)2.3 minimum
Bleed % 24 Hours @ 200°C2.0% maximum
Evaporation 24 Hours @ 200°C2.0% maximum
Dropping Point>260°C (>500°F)
Minimum Operating Temperature-55°F / 48°C
Maximum Operating Temperature200°C (consistent), 300°C (intermittent)
Electrical Specifications:
Thermal Conductivityin W/múK (BTU in /(hr ft^2 F))
0.657 (4.56)
Dielectric Strength (0.05l gap)400 V/mil
Dielectric Constant @ 1000Hz3.81
Dissipation Factor @ 1000Hz0.0032
Resistivity @ 21°C1.5 x 10^15 Ohm?cm

Ratings & Reviews