Intellinet 524179 Power over Ethernet Injector

SKU# 524179
MFR# 524179
$‎24.95
  • Ideal when AC power is not available
  • Distance support: up to 100 m (328 ft.)
  • Power output of up to 15.4 Watts
  • Supports all IEEE 802.3af-compliant PoE devices (Wireless LAN access points and bridges, VoIP (Voice over Internet Protocol) telephones, IP surveillance cameras)
  • Supports IEEE 802.3af detection and short circuit, overload and high-voltage protection
Select Store to check availability.
Have questions? 800-531-5369

Details


The 524179 is a Power over Ethernet (PoE) Injector from Intellinet. This 1-port injector allows you to connect your IEEE 802.3af-compliant products to a non-PoE LAN switch port. The injector can be used to connect a wireless access point, IP phone, network camera or any IEEE 802.3af powered device to a switch. No need to run AC power lines for your wireless access point, network camera or IP phone. Simply connect the PoE Injector to the LAN switch port, and use the existing Cat5 cabling to deliver DC power as well as transfer data.



Features:

Ideal when AC power is not available
Supports all IEEE 802.3af-compliant PoE devices (Wireless LAN access points and bridges, VoIP (Voice over Internet Protocol) telephones, IP surveillance cameras)
Full-power Class 3 PoE design
Supports IEEE 802.3af detection and short circuit, overload and high-voltage protection
Power output of up to 15.4 Watts


Specifications:
Ports1 x RJ-45 100 Mbps input port
1 x RJ-45 100 Mbps data and power output ports
1 x power input connector (3 pin)
Media Support100Base-TX Cat5 UTP/STP RJ-45, 8 pin
Standards• IEEE 802.3af (Power over Ethernet)
• IEEE 802.3 (10Base-T Ethernet)
• IEEE 802.3u (100Base-TX Fast Ethernet)
Protection Functions• Short-circuit protection for short GND
• Overload protection for currents over 450 mA
• High-voltage protection for output voltage exceeding 52 V
LEDsAC Powered (red), Channel Powered (green), Channel Alarm (red)
PowerInput: 100 – 240 V AC, 50 – 60 Hz
Output: 48 V DC / 350 mA
Consumption: 19 Watts (maximum)
HousingPlastic ABS
EnvironmentalOperating Temperature: 0 – 60°C (32 – 140°F)
Operating Humidity: 10 – 90% RH, non-condensing
Storage Temperature: -20 – 85°C (-4 – 185°F)
CompatibilityAll IEEE 802.3af-compliant PoE devices
CertificationsFCC Class B, Part 15, CE 89/336/EEC
Supported Intellinet Products• Wireless 300N Access Points (524735, 524711)
• High Power Wireless G Access Point (503082)
• PoE Splitter (502900)
• Network Cameras (550932 NBCC30-IR, 550963 NFC30-IR, 550949 NFC30, 550987 NFD30, 551021 NFC31, 551045 NFC31-IR)
Dimensions120 (L) x 50 (W) x 35 (H) mm (4.7 x 2.0 x 1.4 in.)
Weight0.14 kg (0.3 lbs.)
Warranty3 year manufacturer warranty


Package Contents:
Power over Ethernet Injector
Power Cable
Instruction Sheet

Ratings & Reviews