Fluke Networks PTNX8-VV-PRO Pocket Toner NX8 Voice and Video Pro Kit

  • Test cables 8x faster with 8 ID caps—with LED to indicate continuity
  • Low-voltage circuit protection (6v-52v) in main unit and toner unit
  • Eight segment LED displays five different test results
  • Main unit "beeps" when line condition changes
  • Bi-gender toner unit with removable Speed 81™ coupler
  • Two buzzers to indicate continuity
  • Test for dial tone and polarity with the Dial Tone Detective
  • Auto shut-off feature extends battery life
  • One-year Manufacturer Limited Warranty
Select Store to check availability.
Have questions? 800-531-5369
The Pocket Toner NX8-Voice and Video Pro kit allows users to quickly and easily test coax, telephone, home theater, audio, video, security and fire cables for continuity, AC and DC voltage, shorts, opens and 50-75 Ω termination—8x faster with 8 ID caps.

Simply place each of the numbered ID caps on the remote ends of the cables to test then connect the main unit to the other end of the test cables one at a time. If there is continuity, the green LED on the ID-cap will light and the main unit will show the ID cap's number (1-8) on its digital display. In addition, the audible indicator in the main unit will emit a short tone. The PTNX8 also tests for the presence of both AC and DC voltages from 6v-52v.

What's In the Kit
  • Pocket Toner NX8
  • 8 ID caps
  • 66 block adapter
  • 8 RJ-11 adapters
  • Dial Tone Detective
  • Alligator clips and RJ-45 adapter
  • F-female couple (F-81)
  • F-male coupler (F-71)
  • F-female coupler (Speed 81)
  • F-male push-on adapter
  • AAA battery
  • Deluxe case with belt clip
  • Approximate Distance: RG6: 300 m (1,000 ft)
  • Output Voltage in Continuity Mode: 3.6 Vdc (with a new battery)
  • Toner Frequency: Main Unit: 2.7 kHz. Toner cap: 2.3 kHz
  • Maximum Input Voltage: 60 Vdc
  • Battery Type: 1.5 V AAA alkaline
  • Auto Shut-Off: 10 minutes
  • Operating Temperature: -20 °C to +65 °C
  • Storage Temperature: -30 °C to +70 °C
  • Altitude: 3,000 m (10,000 ft) maximum
  • Relative Humidity: 5 % to 95 % (non-condensing)
  • Dimensions and Weight: 5.4 in x 0.6 in (138 mm x 15 mm), 2.2 oz (62.4 g)
  • Conforms to relevant Australian standards
  • Listed by the Canadian Standards Association CSA C22.2 No. 61010.1.04

Ratings & Reviews