The 95-1051 is a Single Channel HD Video Balun from Calrad. These video baluns allow standard coax cables to be replaced by category 5e, 6, 7 and other forms of twisted pair wire in CCTV video camera & surveillance installations. Video baluns generally provide a more cost effective solution using structured cabling techniques to wire security cameras, up to 4 video signals can be sent over a single cable with 4 UTP wires. By using video baluns, UTP has a smaller profile and the wire can be run over longer distances easier than coax cable and for less money.
| Features: |
| |
| Real Time Transmission |
| 75 Ohm BNC Male Plugs |
| Built-In Surge Protection |
| < 60dB Crosstalk Rejection |
| EDS Protection |
| EMI-RF Interference Filter |
| Supports NTSC, PAL, Secam Video Formats |
| Specifications: |
| |
| UTP Termination | 2 Pin Solderless Terminal Block, accepts 22AWG through 24AWG cables |
| Video Termination | 75 Ohm Male BNC connector |
| Video Formats | HD-TVI, HD-CVI, AHD-Analog Signals |
| Video Standards | NTSC, PAL & SECAM |
| Signal Isolation | 60dB Crosstalk and noise immunity |
| Housing | ABS Plastic |
| Dimensions | L-1.66” x W-.7” x H-0.68” (BNC connector excluded) |
| Distance: |
| HD-TVI 1080p | Color Video 820-ft max for Camera |
| HD-CVI 1080p | Color Video 787-ft max for Camera |
| Analog HD 960 | Video 1082-ft max for Analog Camera |
| Package Contents: |
| |
| 2 x Single Channel HD Video Baluns (1 x Transmitter & 1 x Receiver) |
