Cable Prowler PRO Test Kit

SKU# TCB360K1
MFR# TCB360K1
$‎826.95
  • Displays Length Measurement for Each Pair in Feet or Meters Using TDR Technology
  • Detects Presence of PoE and Class of PoE per IEEE 802.3af/at With Load Test for Voltage Drop
  • Detects and Reports Current Link Speed and Link Capabilities for Active Ethernet Drops Up To 1 Gbps
  • Link Light To Identify Location on a Hub/Switch/Router Port
  • Supports Up To 8 Testing & ID Remotes for Network & Telephone Cables
  • Supports Up To 20 Network & Coax ID – Only Mapping Remotes
  • Full Color Graphical Wire-Mapping
Select Store to check availability.
Have questions? 800-531-5369

Details


The TCB360K1 is the Cable Prowler PRO Test Kit from Platinum Tools. This kit features the Cable Prowler Tester with a high-resolution color display and internal memory for saving, downloading and outputing results in full color. The unit combines the abilities of a high-end cable and length measurement tester with the ability to identify link status, link capability, and PoE detection. It's perfect for testing Cat 3/5e/6/6A, coax, and telephone cables.



Features:

Detects presence of PoE and class of PoE per IEEE 802.3af/at with load test for voltage drop
Link light to identify location on a hub/switch/router port
Generates selectable tones on selected pins for use with tone tracers
Supports up to 20 network & coax ID - only mapping remotes
Full color graphical wire-mapping
Multilingual (English, French, Spanish)
Displays length measurement for each pair in feet or meters using TDR technology
Detects and reports current link speed and link capabilities for active Ethernet drops up to 1 Gbps
Tests ethernet cable configuration and verifies connectivity while conducting tests for opens, shorts, miswires, split pairs, and reverses
Supports up to 8 testing & ID remotes for network & telephone cables
View saved cable tests
Ability to define cable name, save cable tests and print ALL results (cable testing & network testing)


Specifications:
Cable MeasurementsCable Testing and ID: up to 1000 ft (305 m)
Split Pair Detection: 3 ft (1 m) to 1,000 ft (305 m)
Length Measurement: 0 to 1,500 ft (457 m), ± (5%+1 ft)
Supports 8 continuity and ID number remotes (RJ45)
Supports 20 RJ45 and 20 F connector ID only remotes
Power over EthernetTests for IEEE 802.3af and IEEE 802.3at (PoE Plus) compliant PoE
Tests for classes and loads cable up to 25.5 watts
(at class 4) Identifies Mode A or B (pairs with PoE)
Active EthernetIndicates advertised speeds of 10/100/1000base-T half or full duplex. Can link to network at 10/100base-T
Maximum VoltageRJ Jack: 66 VDC or 55 VAC
F Connector: 50 VDC or VAC
Save Test ResultsStores up to 250 cable or network tests with user defined names
Tone GenerationTone Frequencies: 730 Hz and 1440 Hz
LanguagesEnglish, French, Spanish
Battery LifeFor 6 x AA, 9VDC, 2,200 mA-hr (typical) alkaline battery:
Operating – 20 hours typically
Standby – 1.5 years typically
(200uA max standby current) Batteries are included
Altitude10,000 ft (3048 m) operating
TemperatureOperating: 32 to 122°F (0 to 50°C)
Storage: -22 to +140°F (-30 to 60°C)
Humidity10 to 90% non-condensing
EnclosureHigh-strength PC/ABS plastic with V0 rating with boot
Withstands 4 foot drops onto concrete
Safety CompliancesCW
Dimensions1.85"H x 3.6"W x 6.8"L (4.7 x 9.15 x 17.3 cm)
Weight

Ratings & Reviews