MG Chemicals Silver Conductive Epoxy, 14g (0.35 oz)

(0) No Reviews yet
SKU# 8331-14G
MFR# 8331-14G
$‎52.95
  • Resistivity of 0.007 ?·cm
  • Thermal conductivity of 1.4 W/(m·K)
  • 1:1 mix ratio
  • Working life: 10 minutes
  • Cure time: 24 hours at room temperature or 15 minutes at 65 °C (149 °F)
  • High tensile, compressive, and lap shear strength
  • Strong resistance to humidity, salt water, mild bases, and aliphatic hydrocarbons
  • Shelf life: 3 years at room temperature
  • RoHS 3 compliant
Select Store to check availability.
Have questions? 800-531-5369

Details


This two part silver epoxy offers high electrical conductivity and strong conductive bonding. Use in place of traditional soldering on heat sensitive components. Good for repairing defective traces and creating jumpers on boards. Can be used as an effective heat sink adhesive. This Conductive Silver Epoxy comes in two 7g syringes.

This epoxy adhesive can adheres not only on most of the metal surfaces (aluminium, bronze, brass, copper, steel etc.) but it can also well adheres on glass, wood, plastic, paper, fiber & rubber surfaces as well.

Base material Plastic cap Heat cured (at 65°C for 15 minutes) 0.8 ohms Base material Fiber glass epoxy Heat cured (at 65°C for 15 minutes) 2.5 ohms Maximum operating temp.: 150°C ( 302°F ) Cure time @ 65°C (150°F): 15 minutes Mixing Ratio: 1:1


Electrical Resistance (in ohms)
Sample size 3mm x 3mm x 1mm
Uncured material no reading
Air cured (at room temp. for 5 hours) 0.2 ohms
Electrical Resistance (in ohms)
Sample size 30mm x 25mm x 1mm
Uncured material no reading
Air cured (at room temp. for 5 hours) 4.0 - 6.0 ohms
Specifications:
Minimum operating temp.: -40°C ( -40 °F )
Cure time @ 24°C (75°F): 5 hours
Working time @ 22°C: 10 minutes

Ratings & Reviews

No reviews available

Be the first to Write a Review