|
ConnectGear 1000BaseT to Fiber (SC) Single Mode Media Converter
ITEM# GC-G21SCS
Description: ConnectGear's GC-G21SCS is a 1000Mbps Gigabit Ethernet Media Converter offering a simple and cost-effective method to convert between 1000BaseT UTP Cat. 5/5e cables and 1000BaseLSX single mode 9/125um (1310nm wave length) fiber cables.
As defined in IEEE 802.3ab Gigabit Ethernet standards, 1000BaseT specifies the transmission over UTP cable can transmit signals up to 100 meters. Using GC-G21SCS, the same signals can transmit up to 10K meters via single mode fiber cables.
The GC-G21SCS comes with one MDI/MDIX auto-crossover support RJ45 connector that allows connection to a 1000BaseT device such as workstation, hub or switch and one fiber connection (single mode SC type connector) that allows connection to network devices equipped with 1000BaseLX interface or another GC-G21SCS.
Key Features
- MDI/MDIX auto-crossover on RJ45.
- Support jumbo frame (64 - 9216 Byte)
- Support Half-Duplex and Full-Duplex operating modes.
- Complete set of diagnostic LEDs to indicate the converter's operating status.
- Rugged metal case.
- Compact and slim design.
Specifications
- Standards: IEEE 802.3ab 1000BaseT and IEEE802.3z 1000BaseLX
- 1000Base-T Port: RJ-45 x 1 (support Auto MDI/MDI-X function for uplink.)
- 1000BaseLX Port: Single Mode SC type x 1
- Signal Wave Length: 1310nm
- Max. Distance: 10Km (9/125um fiber cable)
- Min. TX Power: -9.0dBm
- Max. TX Power: -3.0dBm
- Sensitivity: -21dBm
- Link Budget: 12.0dB
- Transmission Mode: Full-Duplex or Half-Duplex, depending on connected devices.
- LED: Power, TP Act, Fiber Act, TP Link, Fiber Link, FDX
- Dimensions: 71 x 94 x 26 mm (WxDxH)
- Weight: 0.6Kg
- Operating Temperature: 0 ~ 55 deg. C
- Storage Temperature: -20 ~ 60 deg. C
- Operating Humidity: 5 ~ 95% (Non condensing)
- Power Supply: External 5VDC, 1.5A
- Power Consumption: 6W
- Emission: FCC Class A & CE Mark
- Warranty: One Year
|
