|
Promise FastTrak TX2000 Ultra ATA133 RAID PCI Card WAS $109.95
This Item is on Closeout and has a Limited Supply
Not Available in all Stores!!!
Please Call or Order Online
ITEM# FASTTRAK/TX2K Description: Promise FastTrak TX2000 Ultra ATA133 RAID PCI Card
FastTrak TX2000 raises consumer-based ATA RAID to professional levels. The FastTrak TX2000 ATA RAID card supports Ultra ATA/133 drives to rock workstations and boost small (or large) office servers like never before.
FastTrak TX2000 breaks the video/sound barrier with RAID 0 striping data speeds that easily exceed that of a single Ultra ATA/133 drive. Or use RAID 1 mirroring or 0+1 to protect valuable office data...and take advantage of fast Ultra ATA/133 transfers.
Features:
- Uses standard high octane Ultra ATA/133
drives
- Builds huge capacity arrays with up to
4 drives
- Supports 66MHz PCI motherboards for
doubled data throughput
Benefits:
- FastTrak TX2000 offers better data transfer
support for Ultra ATA/133 drives under RAID 1 or
RAID 0+1 than a conventional controller, while
at the same time protecting user data every time
you save a file. You get burst data transfers of
133MB per second for your workstation or office
server. TX2000 keeps your system up and
running… even if a drive fails. Plus it supports
on-the-fly hot swap replacement of a failed drive
to get to your data 24 x 7 for continuous
PC operation.
- FastTrak TX2000 builds maximum value and
reliability with its industry-leading, best-selling
Ultra ATA/133 Promise chipset that’s been
thoroughly tested by virtually every drive manuf
a c t u r e r. The onboard Promise BIOS auto-identifies
and optimizes attached drives, assuring
maximum throughput.
Specifications:
Drive Support:
- Supports Ultra ATA/133 drives; backward compatible with older Ultra ATA and EIDE drives
Controller Data Channels:
- Two independent channels assure maximum performance of each attached drive
Large LBA Mode:
- 48-bit LBA supports drive sizes greater than 137GB each
Data Transfer Rate:
- Up to 266MB/sec (depends on drive speed and use of multiple drives and presence of 66MHz PCI bus)(Backward compatible with 33MHz PCI bus for up to 133MB/sec data transfers)
RAID Levels:
- RAID 0 striping of up to 4 drives for performance
- RAID 1 mirroring of 2 drives for fault tolerance
- RAID 0+1 striping/mirroring of 4 drives
- JBOD spanning of up to 4 drives for capacity
Data Protection:
- Mirrors data to second drive or drive pair on-the-fly; offers hot spare feature for
instant rebuild of failed drive for RAID 1 array; hot swap failed drive and rebuild
data in background for continuous PC operation (Hot swap with ultra ATA/133 speed requires Promise SuperSwap 1000 Option)
PCI Bus Support:
- Compatible with 66MHz PCI motherboards; automatically backward compatible
with 33MHz; PCI 2.2 compliant
Disk Array Support:
- Supports up to 4 arrays with different RAID levels; different arrays are selectable
and bootable
FastBuild BIOS Auto-Menu:
- Provides auto configuration and optimization; view/create/delete arrays; rebuilds
failed disks
Promise Array Management:
- Windows-based utility monitors status of arrays, hard drives, and optional Promise
Software:
- SuperSwap 1000 enclosures via TCP/IP; warns of drive failure; allows rebuilds of
mirrored arrays; synchronization of hard drives
Advanced Monitoring:
- Monitors S.M.A.R.T. status of attached hard drives; logs array errors and events to
Windows NT/2000/XP Event Log; permits e-mail notification of errors and array
events; Linux Syslog compatible
Operating Systems:
- Windows XP/2000/NT4/Me/9x; Novell NetWare 4.1x/5.x; RedHat Linux
7.0/7.1/7.2; TurboLinux Server 6.5; TurboLinux Workstation 7; SuSE Linux 7.2;
OpenLinux 3.1
|
