|
Promise Ultra ATA100 PCI 2-channel ATA RAID 1, 0 Card WAS $98.95
This Item is on Closeout and has a Limited Supply
Not Available in all Stores!!!
Please Call or Order Online
ITEM# FASTTRAK100 Description: Promise Ultra ATA100 PCI 2-channel ATA RAID 1, 0 Card
This dual-channel RAID card offers powerful options for small office/home office and professional workstations at incredible values. Creates economical, fault-tolerant RAID 1 arrays for entry-level networks. If one drive fails the other drive continues to save and retrieve data. Use with multiple Ultra ATA/100 drives under RAID 0 to double sustained data transfer rates when working on large files. Supports hot swap operation using optional SuperSwap chassises. Each card offers easy array setup through the FastBuild onboard BIOS utility. Easy management, maintenance, and monitoring with included FastCheck GUI.
FastTrak100 TX2 supports up to 4 Ultra ATA/100
drives on two independent data channels. Get
RAID 0 striping speeds up to 200 MB/s sustained.
TX2’s RAID 1 mirroring speeds will also blow
away comparable RAID cards.
Features:
- Up to 200 MB/sec data transfer rate
Supports 66MHz PCI motherboards for
higher data bandwidth
- Supports hot swapping of failed drive
under RAID 1
- Uses standard high octane Ultra ATA/100 Drives
Supports Windows 2000/NT/ME/98/95;
RedHat Linux 6.2/7.0; Netware 5.x
Specifications:
- Drive Support: Supports Ultra ATA/100 drives; backward compatible with older Ultra ATA and EIDE drives
- Controller Data Channels: Two (TX2 and LP) independent channels assure maximum performance of each attached drive
- Data Transfer Rate: Up to 200 MB/sec (depends on drive speed and use of multiple drives and presence of 66MHz PCI bus)
RAID Levels:
- RAID 0 striping of up to 4 drives for performance
- RAID 1 mirroring of 2 drives for fault tolerance
PCI Bus Support:
- Compatible with 66MHz PCI motherboards; automatically backward compatible with 33MHz
Disk Array Support:
- Supports up to 4 arrays with different RAID levels; different arrays are selectable and bootable
- FastBuild BIOS Auto-Menu: Provides auto configuration and drive speed optimization; view/create/delete arrays; rebuilds failed arrays FastCheck GUI
Advanced Monitoring:
- Monitors status of FastTrak100 arrays, attached hard drives, and any installed SuperSwap enclosures under Windows; warns of drive failure; allows rebuilds of mirrored arrays; synchronizes hard drives
- Supports DMI for array monitoring through network; monitors S.M.A.R.T. status of attached hard drives; logs array
errors and events to Windows NT4/2000 Event Log
Operating Systems Compatibility:
- Windows 2000/NT/Me/98/95; RedHat Linux 6.2/7.0; Netware
5.x
|
