ITEM# 256551
Description: Hobbes LANtest Network & Modular Link Cable Tester
The LANtest is the simplest and most affordable wire-mapping device for networking cables available on the market. Use it to read the actual wiring configuration for Cat5; coaxial and modular telephone cables by comparing one transmitting end to another receiving end.
Network & Modular Link Cable Tester LANtest can easily read the correct pin configuration of 10 Base-T cable (Category 5), 10Base-2 cable (coax) and RJ45/RJ11 modular cables by comparing one transmitting end to the corresponding receiving end. Remote kit can test cables installed far away either on wall plate or patch panel. Cable Continuity, open, short and cross-connect verification.
Cabling faults such as open wires, shorts, miswiring and crossed pairs are crystal clear with the LANtest’s unique LED display. Perform all the above tests on installed cables with the included remote terminator.
Features
- Can test the correct pin configuration of 10Base-T 10Basc-2 Thin Ethernet cable, RJ45/RJ11 modular cables 356A, TIA-568A/568B and Token Ring cable, etc.
- Easy to verify cable continuity, open, short and miss-wire
- With remote kit, it can remotely test cable up to 1000 ft away either on wall plate or patch panel
- Can test the grounding
- Features with auto or manual scan for pin-out indicators
- A power switch is provided for saving battery power
Specifications
- Manufacture # 256551
- Power Source: DC 9V battery x 1pcs
- Power Consumption: 22mA
- Operating Temp.: 0˚C~50˚C
- Storage Temp.: -10˚C~60˚C
- Humidity: 0 to 95%(non-condensing)
- Dimension: Main: 104mm x 63mm x 29mm
- Remote: 104mm x 30.5mm x 29mm
- Safety Approve: CE
- Approx. Weight: 195g(Kit) / 45g(Remote)